Casting Process
6 practice questionsWorkshop PracticeStep-by-step solutions
Try a few
1
What happens during the 'Mold Breaking and Cleaning' step?
A.The mould is broken to retrieve the casting and residual sand or impurities are removed
B.The pattern is placed inside the drag flask
C.Molten metal is poured through the sprue
D.Risers are positioned to compensate for shrinkage
2
What determines the cooling time during the 'Solidification and Cooling' step?
A.The metal's thermal properties
B.The type of pattern used
C.The size of the riddle used to sieve sand
D.The number of alignment pins on the flask
3
What is the correct order of the metal casting process steps?
A.Metal Melting, Pouring the Metal, Solidification and Cooling, Mold Breaking and Cleaning, Finishing
B.Pouring the Metal, Metal Melting, Finishing, Solidification and Cooling, Mold Breaking and Cleaning
C.Mold Breaking and Cleaning, Metal Melting, Pouring the Metal, Finishing, Solidification and Cooling
D.Solidification and Cooling, Metal Melting, Finishing, Pouring the Metal, Mold Breaking and Cleaning
Master casting process — not just preview it
All 6 questions with worked solutions, an AI tutor that explains every step, and games that make the drilling stick. Free to start.
Practice this topic freeNo card needed · 10 free AI questions daily